Overview
This article covers the minimum and recommended hardware and software requirements for running BatchMaker on a Windows tablet, laptop, or desktop PC. Meeting these requirements ensures stable operation and reliable NFC tag association during production runs.
Software Requirements
Requirement | Specification |
Operating System | Windows 11 (64-bit) |
Internet Connection | Required (Ethernet recommended; Wi-Fi supported) |
BatchMaker App | Latest version — see Getting Started |
Note: Windows 10 is not supported. BatchMaker requires Windows 11 to function correctly.
Hardware Requirements
Two tiers are defined based on production throughput:
Tier 1 — Standard (up to ~300 tags/min)
Suitable for most pharmaceutical production lines using a single HF (NFC) reader at standard conveyor speeds.
Component | Minimum Specification |
Processor | Intel 13th Gen N-series or equivalent |
RAM | 8 GB |
Storage | 256 GB SSD |
Display | 10.1" or larger; touch or mouse/keyboard input |
USB Ports | Minimum 1× USB-A port (for NFC reader connection) |
Network | Ethernet port or Wi-Fi adapter |
Operating System | Windows 11 64-bit |
Power | AC adapter (continuous operation recommended on production line) |
Tier 2 — High Throughput (300+ tags/min, multiple readers)
Required when using commercial-grade readers capable of more than 300 reads per minute, running multiple readers simultaneously, or processing high-density production lines.
For these deployments, a standard desktop PC or business-grade laptop is preferred over a tablet due to CPU headroom, port availability, and thermal performance under sustained load.
Contact ForgeStop or your hardware provider for a recommended setup.
NFC Reader Requirements
BatchMaker connects to NFC (HF) readers via USB.
Specification | Requirement |
Interface | USB (USB-A connection to host device) |
Protocol | ISO 14443-A/B and/or ISO 15693 |
Operating Frequency | 13.56 MHz (HF/NFC) |
Driver Support | Windows 11 compatible drivers required |
Power | USB bus-powered (no external power supply required for desktop readers) |
Recommended Reader: FEIG ID CPR30pro
ForgeStop recommends the FEIG ID CPR30pro as the primary HF NFC reader for BatchMaker deployments. You can read the full Technical Data Sheet here.
Spec | Value |
Interface | USB Full-Speed — bus-powered |
Frequency | 13.56 MHz |
Protocols | ISO 14443-A/B, ISO 15693, ISO 18000-3M3, ISO 18092 (NFC) |
OS Support | Windows 10 and 11 (32/64-bit) |
The CPR30pro is a compact desktop reader powered entirely via USB — no external adapter required. Its integrated antenna eliminates separate antenna cabling, making it well-suited for production line mounting.
For UHF (dual-frequency) deployments, contact ForgeStop support for compatible UHF reader recommendations and configuration guidance.
Notes for IT & Deployment Teams
Ethernet is strongly recommended over Wi-Fi for production environments. BatchMaker uploads batch data to the ForgeStop cloud in real time — a stable wired connection reduces the risk of interrupted uploads.
USB hubs: If your device has limited USB ports, a powered USB hub may be used to connect additional readers. Unpowered hubs are not recommended for sustained reader operation.
Remote Access & Device Registration: BatchMaker is designed to run in Windows with Remote Access enabled for technical support, and the software license requires registration per device on ForgeStop's platform associated to your brand's account.
Admin access: Initial installation requires Windows administrator credentials. Day-to-day operation runs under a restricted user account.
Last Synced: 2026-10-14 · Sync Status: Current · ID: 14093316 · Language: English